AMERICAN FAST ®
MDF PROFILE FAST ADHESIVE

FOR GENERAL USE :

BONDS MDF, WOOD, MOST PLASTICS, METALS AND ELASTOMERS INSTANTLY

CAP : Special breakaway cap.

AMERICAN FAST ® FAST ADHESIVE DIRECTIONS:

• AMERICAN FAST ® Fast Adhesive, formulated for use with AMERICAN FAST ® Activator.
• Spray AMERICAN FAST ® Activator on surface as needed.
• Let it evaporate for a moment and apply AMERICAN FAST ® Fast Adhesive to the mating part.
• Assemble quickly and let the adhesive polymerise for 10 seconds.

CYANOACRYLATE DANGER :

• * Bonds skin and eyes within seconds. * Use in well ventilated area.
• * Keep out of reach of children. * Store AMERICAN FAST ® Fast Adhesive in cool and dry place.

FIRST AID :

• In case of eyes contact, immediately flush eyes with water at least 10 minutes. Contact a physician.
• Quickly soak in a warm soapy water in case of skin contact.

AMERICAN FAST ® ACTIVATOR OF
AMERICAN ADHESIVE

ACTIVATOR

FOR GENERAL USE :

ACCELERATES BOND OF MDF, WOOD, MOST PLASTICS, METALS AND ELASTOMERS

HEPTANE BASED!

AMERICAN FAST ® 9090 Activator speeds the cure of AMERICAN FAST ® Fast Adhesive and provides initial strength within seconds.

i.e. ; accelerates the poly merization of Cyanoacrylate adhesives.

AMERICAN FAST ® FAST ADHESIVE DIRECTIONS:

• AMERICAN FAST ® 9090 Activator, formulated for use with AMERICAN FAST ® Fast Adhesive.
• Spray AMERICAN FAST ® 9090 Activator on surface as needed.
• Let it evaporate for a moment and apply AMERICAN FAST ® Fast Adhesive to the mating part.

• Assemble quickly and let the adhesive polymerise for 10 seconds.

DANGER :

• AMERICAN FAST ® 9090 Activator may effect painted surfaces and thermoplastic material. Test First.
• This is a pressurized container. Protect from sunlight and do not expose to temperatures exceeding 50 °C.
• Do not pierce or burn even after use.
• Do not spray on naked flame or any incandescent material.
• Keep away from sources of ignition.
• Extremely flammable. Do not smoke.
• Keep out of reach of children.
• Without sufficient ventilation, formation of explosive mixtures may be possible.
• Avoid contact with eyes.
• Avoid contact with skin.

FIRST AID :

• In case of eyes contact, flush eyes with water.Get medical attention.
• In case of contact with skin, wash with soap and water.Get medical attention.

NOTICE :

• To avoid breathing vapors or spray mist, open doors and windows or use other means of ventilation during application and drying.
• If you experience eye watering, headaches, or dizziness, increase fresh air leave the are.
• USE WITH ADEQUATE VENTILATION.
• KEEP OUT OF REACH OF CHILDREN.
• DO NOT SMOKE WHEN SPRAYING AMERICAN FAST ® ACTIVATOR.

| HOME PAGE | AKTİF ® PERFORATED HONEYCOMB  | LOG HOMES FROM U.S.A. | AMERICAN FAST® CHEMICALS FOR BUILDING INDUSTRY | E-MAIL |