AMERICAN FAST ® POLY URETHANE FOAM GUN

 

 

AMERICAN FAST® is multipurpose foam used for filling and erection and produced of imported German patented row material.

Applications : For fixation of doors, window frames, and similar frames, to fill the spaces, for the isolation of warm and cold water pipes; to stuff up spaces holes and cracks.

Technical Properties : After being hard in 2 or 4 hours it can be rough hewed, cleaned and painted. It can be sticked to all kinds of building materials except silicone teflon, polyethylene and polypropylene. It is resistant to every kind of weather conditions sea water steam and moisture. It isn't easy inflammable.

Directions for use : 1. Shake the tube strongly 30 seconds. 2. Turn the dosage trigger and install insert it to the tube. 3. Remove the dirt, grease and dust from the place of application and wet it with
water (Especially wetting the bottom and foam is important for guickening the reaction and obtaining a good result). 4. Turn the tube down and use it that way. 5. At the applications next the dried pieces of foam should be removed from the valves and pipes. 6. Foam which is sticked at places whick should be kept clean, can be cleaned by using acetone. 7. As the volume of foam tenders to expand just the proper quantities should be used.

Storage : Keep in dry and cool rooms upright on the floor at +20? C

Durability : 15 months after production date. Production date is written on the top of the tube.

 

 

| HOME PAGE | AKTİF ® PERFORATED HONEYCOMB  | LOG HOMES FROM U.S.A. | AMERICAN FAST® CHEMICALS FOR BUILDING INDUSTRY | E-MAIL |